Orange Dakine Drafter

The Dakine Drafter the most popular backpack in use at the factory, so we asked Dakine to make us a special Orange version.

As well as being a very fine hydration pack, the Drafter has all the well thought out features that we reckon fit 'Orange Man' or 'Orange Woman', for that matter. Well thought out spaces for a day's worth of tools, spare tube, pumps and of course parkin.

With fleecy padded protection for your ipod, 'shades or camera, plus the expandability to take a full-face helmet and straps for pads, it really does tick all the boxes. It doesn't weigh a ton and it all packs up neatly so you're not all flaps and straps on hairy descents.

The Orange Dakine Drafter includes:

• Moulded back panel with air ventilation
• 2.75 litre (100 oz.) reservoir with quick disconnect hose
• 12 litre internal bag volume.
• Full-face/armour carry straps
• Back panel reservoir pocket
• Internal organiser pockets
• Padded MP3 pocket
• Fleece sunglass pocket
• Tube/pump sleeves
• A finely embroidered Orange Bikes logo

Orange Bikes Lanyard

Web nylon Orange Mountain Bikes printed lanyard. Features quick release clip. Ideal for keys or event passes. New version with safety break-away catch at back of neck.

Orange Chunky Mug

The perfect post-ride accessory. Fill it with piping hot tea or a slosh of finest Java Joe and you're all set (assuming you have some parkin handy). Orange Bikes Headtube and Heritage logos front and rear respectively.

Click here to see the back.

Flexible Orange Keyring

Soft Flexible moulde rubber key fob on a sturdy chain and keyring. Show your colours.

500ml Orange Drink Bottle

Standard size 500 ml Orange Drink Bottle. Wide neck with screw top. Fits in smaller spaces than the large

750ml Orange Drink Bottle

Large 750 ml Orange Drink Bottle. Wide neck with screw top. ML measure guide on side.

Strange Lock-on grips - Black Collars

Superb new grip from the STRANGE ideas department, used by the top bods here and you now can get them for retro fitting.
Available in black as a complete kit only. Kit contains 2 Grips, 4 collars and 2 bar plugs. Fitting requires a 3mm Allen key.

Strange Lock-on grips - Grey Collars

Renowned grip from the STRANGE ideas department, used by the top bods here and you now can get them for retro fitting.
Comes as a complete kit with grey annodised collars. Kit contains 2 black Grips, 4 grey annodised collars and 2 bar plugs. Fitting requires a 3mm Allen key.

Strange Bar Ends Caps

Spare Strange end caps.

Orange Supercross Plus Bar

This riser bar aimed at all round use, offers the higher position without the weight penalty of downhill bars. Features wide-bulge profile to add strength, however, it is not recommended for heavy downhill use. 6061 double-butted heat-treated aluminium. 30mm rise, 9° sweep. 680mm wide. 31.8mm clamp diameter. Weight: 300 grams

Orange Stalk Stem

Lightweight, ergonomic stem design with four-bolt security on 31.8mm ∅ bar clamp. The perfect way to connect your bars. CNC machined, 7°rise, available in 60mm, 70mm, 80mm or 90mm reach. Black only.

P631SPA Rep. Dropout 99 E4/Gringo

Rep. Dropout 99 E4/Gringo

P616SPA Rep. Dropout

fits 2001 models: Evo2, Gringo, E6 and E8

P630SPA Rep. Dropout

fits 1999 Evo 2

P627SPA Rep. Dropout

for 2005 Evo 4, Crush and Gringo.

P624SPA Rep. Dropout

CNCed replaceable hanger fits all Patriot, Patriot 66, SubZero, Sub 5, Five, ST4, Sub 3, Mr XC, MsIsle, Miii and 1998 Orange O2.

P649SPA Rep. Dropout

fits 2004 Evo 4 and Gringo.

P659SPA Maxle Hanger Patriot/Big-T

Spare Maxle replaceable hanger for 2007 Patriot and Big-T. CNCed anodised aluminium.

P593SPA - G-Series, Diva and EVO8

Derailleur Hanger 2008 G2/G3/G4(2008-2011), EVO8 (2008-2009), Diva Hardtail (2010-11), Crush (2012)

P594SPA - Crush

Crush Derailleur Hanger (2008-2011)

P633SPA Derailleur Hanger

for 2006 models: Gringo, G2, ev06, Crush. For 2007 models G2, G3, ev08, Crush.

P615SPA E3 Der. Hanger

Deraileur Hanger for 1998 E3

P654SPA 224 Derailleur Hanger

Replaceable hanger for Orange 224. (Note: NOT the 224-evolution)

P641SPA Rep. derailleur hanger

to fit Alpine 160, Blood and Patriot (2012-).

P591SPA Rep. derailleur hanger

fits 224-evolution and Five Maxle.

P7 Rohloff Dropout (P656spa)

Rohloff-dropout for 2006 P7. Allows the use of the Rohloff Speedhub 500/14 geared hub on the new P7 frame. This 14 speed planetary geared hub has gearing range the same as that of a 27-speed mountain bike drivetrain.

P655SPA Drop-out

fits 2006 Orange P7 with replaceable drop-out system. This version is optional and can be used on a single speed set up to remove the derailleur hanger lug.

P653SPA Drop-out/Derailleur Hanger (P653SPA)

fits 2006 Orange P7 with replaceable drop-out system. This version is required when using a gear derailleur.

P7-08-RH 7.5mm (P595SPA)

2008 P7(MkII) - Right hand standard dropout w/derailleur hanger [7.5mm]

P7-08-LH 7.5mm (P596SPA)

2008 P7(MkII) - Left hand standard dropout [7.5mm]

P7-08-RH SSpeed 7.5mm (P597SPA)

2008 P7(MkII) - Right hand singlespeed dropout [7.5mm]

P7 R/H Standard Dropout (P585SPA)

2009 P7 Right Side standard bolt on drop out (including bolts)

P7 R/H Standard Dropout (P586SPA)

2009 P7 Left Side standard bolt on drop out (including bolts)

P7 R/H Singlespeed Dropout (P587SPA)

2009 P7 Right Side Singlespeed bolt on drop out (including bolts)

P7 L/H Rohloff Dropout (P588SPA)

2009 P7 Left Side Rohloff bolt on drop out (including bolts)

P7 L/H Standard Dropout (P575SPA)

2010-2012 P7 Left Side standard bolt on drop out (including bolts)

P7 R/H Standard Dropout (P577SPA)

2010-2012 P7 Right Side standard bolt on drop out (including bolts)

P7 L/H Rohloff Dropout (P576SPA)

2010-2012 P7 Left Side Rohloff bolt on drop out (including bolts)

P7 R/H Singlespeed Dropout (P578SPA)

2010-2012 P7 Right Side Singlespeed bolt on drop out (including bolts)

Pivot Bearing Kit 28mm

28mm Pivot Bearing Kit, Sub3/Sub5/Mr XC/Five/pre-2000 Patriot*.
Includes bearings x 2, Caps x 2 and bolts x 2.
(*With Patriot models please measure the outside diameter of the bearing cap, to check whether you have a 28mm or 32mm pivot bearing.)

Pivot Bearing Kit 32mm

Pivot Bearing kit to fit Patriot (2000-2005)/Patriot 7+/222/223/224.

Pivot Bearing Kit 28mm MkII

28mm Pivot Bearing Kit for Patriot 66 28mm.

Pivot Bearing Kit 32mm MkII

Pivot kit to fit 224-evolution and Alpine 160 models. Includes bearings x 2, Caps x 2 and bolts x 2.

Shock Mount Bolts

Shock mounting bolt to fit all models. You need two bolts to fit a shock. Please carefully check the size of each bolt, they are often different. How to check each size you need?

P608axl 222/Patriot 7+ axle

135mm 222/Patriot 7+ 12 mm bolt thru rear axle. 169 mm length.

P619axl 223/224-evo 150 Rear Axle

224 evolution and 223 12 mm bolt thru rear axle. 183 mm length.

P606axl 224 Rear Axle

224 150mm rear axle 12 mm bolt thru rear axle. 177 mm length.

224-evo adjust head angle insert

224-evolution adjustable head-angle insert. Reversable insert that allows +1°/-1° of head angle adjustment from standard straight insert.

Seatpost Shim 27.2-29.8

Alloy seatpost shim as used in P7 frame to take 27.2 seatpost

Cable Grommets (set of 6)

A set of 6 grommets to fit in the swingarm when replacing gear/brake cables on all Horiz-Hold suspension bikes. Only two are required, but have a few for the toolbox while you're at it.

Swingarm plugs

These are the hard plastic plugs that fill the smaller of the two sets of holes on the inside of the swingarm on a 224-evo and a Five. Only 2 are needed but it is well worth having a few spares.

Downtube gusset grommet

This small rubber grommet plugs the little hole under the gusset between the head tube and down tube. These are fitted on a Five, Alpine 160, Patriot, Blood and ST4.

P_Clips

On the Alpine 160 and 224-evo these handy little P shaped clips hold your brake hoses and gear cables in place. This set of four gives you all you need for one bike. Select which bike you want them for.

U-Clips

The small plastic U shaped clips that hold your gear cables and brake hoses into the guides on the frame. These are used on almost all of our bikes is different quantities. 6 are enough for most models except the Blood which uses 10.

Five Grommet Kit

This is a complete kit with all the clips and grommets needed for a Five. The kit includes: 2 cable grommets, 2 Swingarm plugs, 2 U-clips, 1 double U-clip and 1 down tube gusset grommet.

Strange Bar Ends Caps

Spare Strange end caps.